Common QuickP Errors

Common QuickP Errors


When an order artwork goes into the QuickP hotfolder, there are a few reasons why it can fail.  This article covers the most common reasons, and how to avoid them. 

 

Incorrect naming convention 

When an item has the Kornit naming convention applied to it, it will have the structure "Kornit Setup_Kornit Table_[Artwork name]_Quantity_X offset_Y offset". 

If the Kornit Setup value does not correspond to a setting on your machine, or the setting has an underscore in its name, it will not work.  If the Kornit Table value does not correspond to a pallet name, it will not work.  If either offset values have additional data in them (eg. Decimal points, the local computer renaming the file to be "...(1)"), it will not work. 


Pallet mismatch 

If you load the artwork with the Kornit Table "Standard pallet", but don't have that pallet loaded on your machine, QuickP will give an error message.  Make sure you load the appropriate pallet, and try again.  If it still gives that error, make sure the Kornit Table name is correct for that product. 

 

Wrong XY-Offset

If your artwork combined with your X & Y offsets exceeds the pallet dimensions, QuickP will give this error message. 

If you're using the RIP integration (Autocrop) on your Production Centre, make sure the product's print area sizes are accurate to the pallet it's using, and that your Print Sizes don't scale the artwork. 

If you are using the Production integration on your Production Centre, make sure the print area sizes never exceed the pallet dimensions that you are using for that size.  Then make sure the X and Y offsets defined combined with the artwork size don't exceed the pallet dimensions.  If you want the artwork to be centralised on the X or Y axis, you can set either value to "-1". 


For more information, please consult the image below.  If you encounter an error not mentioned here, please message your Kornit X point of contact. 


    • Related Articles

    • Live Preview Products | Troubleshooting Common Problems

      Overview This article is designed to help troubleshoot some common problems related to product setup and configuration Errors My Smartlink is endlessly loading If you are using a distributed Smartlink, any product changes can take up to 4 hours to ...

    • Standardised Order Errors | Setup

      Introduction The following article has been created to detail how to set up standardised order errors enabling a clearer & more concise way to report back error patterns from the fulfiller by grouping these by error type in the Kornit X Platform & ...

    • Kornit Pallet names and sizes

      As of February 2024, this article is up to date with all current Kornit Machine pallet sizes When setting up your Kornit workflow, you will need to make sure the artwork generated by the system has the correct naming convention. If the item doesn't ...

    • RIP integration | Kornit QUICKP

      Introduction To integrate your Production Centre company and QuickP in to one singular workflow you must use the RIP integration 'Kornit QuickP'. This RIP integration is simple to set up and does two important things: The Offset X and Y are ...

    • API Troubleshooting and Errors

      Orders API Documentaiton: https://developers-v2.custom-gateway.net/#order-it List of Error Codes relating to Order API: https://developers-v2.custom-gateway.net/#errors See video below: